Reconnect Garmin Watch keeps the connection to your watch and reconnects the watch after being away from phone. It runs in the background and battery usage is very low.
The app requires Garmin Connect installed. NOTE: I am NOT from Garmin.
The app works for Fenix 3/5 and Forerunner 235/735XT/920. Sometimes also for other models.
When you run the app the first time, it will start Setup. Please follow the instructions exactly.
Huawei phones: Please see text at the bottom
Troubleshooting:
>> On Galaxy phones, you may have to reboot the phone and force stop the "Bluetooth share" app (go to phone Settings - Applications, show system apps - Bluetooth share - Force Stop).
>> When Vivoactive HR disconnects, sometimes you have to go into Garmin Connect menu - Garmin Devices, and then turn off Bluetooth on the phone. Connect should prompt you to turn on Bluetooth again; do it and wait 10-20 sec, and then the watch should reconnect. (You should also have Location Services turned on in Android settings!)
>> Some phones (like Lenovo) may only work if the watch BLE-ANT firmware is downgraded. You need to Google a file called something like GUP1909.BIN and upload it to the watch from a computer.
>> If the watch shows it's CONNECTED but you don't get any notifications:
* Open Garmin Connect and select Settings - Smart Notifications. Disable and enable one of the notifications, like Incoming Calls. This could make Connect ask for permissions.
* If it keeps asking for permissions even though you gave permission then restart the phone.
-- If it doesn't ask for permissions:
* Go to your phone's Settings - Apps - Connect - Permissions and enable all permissions
Issues with Garmin Connect on some Huawei phones:
You can try the following.
* Turn off Location Services on your phone and then try to add the watch in Garmin Connect
- OR -
* Install and run the app "Bluetooth pair"
- OR -
* Solution from fin:
https://forums.garmin.com/forum/on-the-trail/wrist-worn/fenix-3/1271446-unable-to-pair-fenix-3-with-android-7-0-phone
Latest status from Garmin on this issue:
https://support.garmin.com/faqSearch/en-US/faq/content/pvL8aWsaLU2iKyvF8VrpP9
Reconnect Garmin Xem giữ kết nối với đồng hồ của bạn và kết nối lại đồng hồ sau khi ra khỏi điện thoại. Nó chạy ở chế độ nền và sử dụng pin là rất thấp.
Các ứng dụng đòi hỏi Garmin Connect cài đặt. LƯU Ý: Tôi không từ Garmin.
Các ứng dụng làm việc cho Fenix 3,5 và của người Forerunner 235 / 735XT / 920 Đôi khi cũng cho các mô hình khác.
Khi bạn chạy ứng dụng lần đầu tiên, nó sẽ bắt đầu cài đặt. Hãy làm theo các hướng dẫn chính xác.
điện thoại Huawei: Xin xem văn bản ở phía dưới
Gỡ rối:
>> Trên điện thoại Galaxy, kan có hai khởi động lại điện thoại và lực lượng ngăn chặn sự "Chia sẻ qua Bluetooth" ứng dụng (vào Settings điện thoại - Ứng dụng, hệ thống chương trình ứng dụng - Chia sẻ qua Bluetooth - Force Stop).
>> Khi Vivoactive HR ngắt kết nối, đôi khi bạn có hai đi vào trình đơn Garmin Connect - Garmin Devices, và sau đó tắt Bluetooth trên điện thoại. Kết nối không nên nhắc bạn hai bật Bluetooth một lần nữa; làm điều đó và chờ 10-20 giây, và sau đó là chiếc đồng hồ không nên kết nối lại. (Bạn nên også có Location Services bật trong cài đặt Android!)
>> Một số điện thoại (như Lenovo) kan chỉ có tác dụng nếu đồng hồ firmware ANT BLE đang xuống cấp. Bạn cần Google một tập tin gọi là cái gì đó như GUP1909.BIN và tải nó lên đến khi chiếc đồng hồ từ một máy tính.
>> Nếu đồng hồ cho thấy nó được kết nối nhưng bạn không nhận được bất kỳ thông báo:
* Mở Garmin Connect và chọn Settings - Smart Notifications. Vô hiệu hóa và kích hoạt một trong những thông báo, giống như cuộc gọi đến. Điều này có thể làm cho Connect xin phép.
* Nếu nó vẫn không ngừng yêu cầu quyền ngay cả khi bạn cho phép món quà sau đó khởi động lại điện thoại.
- Nếu nó không yêu cầu quyền:
* Đi tới Cài đặt điện thoại của bạn - Apps - Kết nối - Quyền và cho phép tất cả các quyền
Các vấn đề với Garmin Connect trên một số điện thoại Huawei:
Bạn có thể thử følgende.
* Tắt Dịch vụ Vị trí trên điện thoại của bạn và sau đó thử hai thêm chiếc đồng hồ trong Garmin Connect
- hay -
* Cài đặt và chạy ứng dụng "cặp Bluetooth"
- hay -
* Giải pháp từ mỹ:
https://forums.garmin.com/forum/on-the-trail/wrist-worn/fenix-3/1271446-unable-to-pair-fenix-3-with-android-7-0-phone
trạng thái mới nhất từ Garmin về vấn đề này:
https://support.garmin.com/faqSearch/en-US/faq/content/pvL8aWsaLU2iKyvF8VrpP9